Brink Allure B16-25 HRD(2100) | SWB HR | Filter | 531505

Brink Allure B16-25 HRD (2100)| SWB HR filter

This set consists of: 1 filter - Dimensions: 465 x 465 mm.

This heat recovery filter set  is produced in-house by hq-filters.nl with the filter standard  ISO 16890 , which is equal to the original filters.
With our own production, we can offer high-quality product alternatives at attractive prices.

Suitable for: Brink Allure B16-25 HRD(2100) | SWB HR

Filter class: G3 - EN779:2012 | ISO coarse  50% - ISO 16890

PAY ATTENTION!
WITH AN ALLURE DOWNFLOW THE FILTER IS NOT IN THE DEVICE.
This is in one of the following filter constructions:
– Filter cassette open return
– Filter return air boxes Allure (order 2 pieces)
– Filter cassette side connection, (short or long)

Type: Wireframe Filter

Dimension: 465 x 465 mm.

Brand: HQ-filters.nl

Brink no. 580525 - 531505

The filter standard: EN799:2012  has been replaced by the filter standard: ISO16890 sinds since 1 July 2018
The filters are classified in so-called ePM categories.
This classification gives an accurate indication of which particle sizes are filtered out of the air.

PM1 stands for all types of particulate matter ('ParticulateMatter') that are smaller than 1 micron (μ = one thousandth of a millimeter):
PM1: 1μ = 0.001mm
PM2.5: 2.5μ = 0.0025mm
PM10: 10μ = 0.01mm
The 'e' for PM1 stands for 'efficiency' and indicates the efficiency of the air filter in capturing PM1.

Based on these values, the standard now divides filters into four groups that filter different dust particles:
ISOCoarse< 50% (sand, fluff, hair)
ISO ePM10 ≥ 50% (pollen, rock dust)
ISO ePM2.5 ≥ 50% (mold spores, toner dust)
ISO ePM1 (combustion particles, nanoparticles, viruses)

For questions, suggestions or special filter requests, call 0513-648364 or send an email to [email protected]

The HRV filters for the Brink Allure can You easily replace and places in your HEAT EXCHANGER unit