Brink Elan 22 duo / 25 - filter | 531385
Brink Elan 22 Duo / 25 | filter
Elan 25 / Elan 22 Duo / Elan 25 heating and cooling
This heat recovery filter set is produced in-house by hq-filters.nl with the filter standard ISO 16890 , which is equal to the original filters.
With our own production, we can offer high-quality product alternatives at attractive prices.
This set consists of: 1 filter - Individually packed, Dimensions: 595 X 550 mm.
Suitable for:
elan 25
Elan 22 Duo 2 zone
Elan 25 heating/cooling
The serial number of the device starts with 004800, 004510, 004560, 004500, 004550xxxxxx
Filter class: G3 - EN779:2012 | ISO coarse 50% - ISO 16890
Type: Wireframe Filter
Dimension: 595 X 550 mm.
Brand: HQ-filters.nl
Brink no. 580546 - 531385
With the purchase of these heat recovery filters you bring fresh air from the outside in. Good ventilation is important to maintain the indoor climate of the home, but also to ensure that substances, dirt, bacteria and fungi cannot build up in the ventilation system.
Regular filter changes mean significant energy savings.
The filter standard: EN799:2012 has been replaced by the filter standard: ISO16890 sinds since 1 July 2018
The filters are placed in so-called ePM categories.
This classification gives an accurate indication of which particle sizes are filtered out of the air.
PM1 stands for all types of particulate matter ('ParticulateMatter') that are smaller than 1 micron (μ = one thousandth of a millimeter):
PM1: 1μ = 0.001mm
PM2.5: 2.5μ = 0.0025mm
PM10: 10μ = 0.01mm
The 'e' for PM1 stands for 'efficiency' and indicates the efficiency of the air filter in capturing PM1.
Based on these values, the standard now divides filters into four groups that filter different dust particles:
ISOCoarse< 50% (sand, fluff, hair)
ISO ePM10 ≥ 50% (pollen, rock dust)
ISO ePM2.5 ≥ 50% (mold spores, toner dust)
ISO ePM1 (combustion particles, nanoparticles, viruses)
For questions, suggestions or special filter requests, call 0513-648364 or send an email to [email protected]
The HRV filters for the Brink Elan can You easily replace and places in your HEAT EXCHANGER unit
